Nail Puller; Type Nail Pullers; End Style Claw; Point; Bar Width 5/8 in; Overall Length 10 in; Number of Nail Slots 1; Bar Shape Hexagon; End Angle Style L-Shape; End Width 5 in; Tether Ready No; Bar Color Gray; Bar Material Steel; Features 90 Degrees F Head; Available in Single; Double and Combination Ends; Finish Powder-Coated; Handle Color Gray; Includes Handle No; Standards ANSI; Weight 1.05 lb

Half Round Nose Chisel;1/4 In. x 5.5 In.

Line-Up Pry Bar, Type Pry Bars, End Style Chisel, Bar Width 1/2 in, Overall Length 14 in, Number of Nail Slots 0, Bar Shape Hexagon, End Angle Style Offset, Straight, End Width 2 1/4 in, Tether Ready No, Bar Color Black, Bar Material Steel, Features Angled Chisel End for Extra Leverage, Long Tapered End, Finish Blast, Handle Color Black, Includes Handle No, Series LINE-UP, Weight 0.72 lb

Roll Pin Punch Set, Set Type Punch Set, Types Included Pilot Punch, Number of Pieces 12, Includes Handle No, Includes Handguard No, Material Applications Metal, Stainless Steel, Overall Length 2 3/4 in, 3 1/4 in, 3 1/2 in, 4 in, 4 1/2 in, 5 in, 5 1/2 in, 6 in, Includes 1/2 in x 6 in, 1/4 in x 5-1/2 in, 1/8 in x 4 in, 3/16 in x 4-1/2 in, 3/32 in x 3-1/2 in, 3/8 in x 6 in, 5/16 in x 6 in, 5/32 in x 4-1/2 in, 5/64 in x 3-1/4 in, 7/16 in x 6 in, 7/32 in x 5 in, Pilot Punch: 1/16 in x 2-3/4 in

Combination Punch Set, Set Type Punch Set, Types Included Center Punch, Pin Punch, Prick Punch, Solid Punch, Number of Pieces 24, Includes Handle No, Includes Handguard No, Material Applications Metal, Stainless Steel, Overall Length 4 1/2 in, 4 3/4 in, 5 in, 5 1/4 in, 5 1/2 in, 5 3/4 in, 6 in

Cold Chisel, Chisel Type Cold Chisel, Material Applications For Metal, Blade Tip Shape Angled, Blade Width 1 in, Includes Striking Cap No, Includes Handle No, Material Steel, Overall Length 18 in, Handle Material Steel, Non-Sparking No, Tether Ready No, Blade Length 0 in, Blade Tip Hardness 55 to 57 HRC, Corrosion-Resistant Yes, End Style Oversized, Features Greater Strength, Used to Cut and Shape Metals Softer, Finish Black Oxide

Progrip MiniaTurkeye Long Pick Set,4Pc

Punch/Chisel Display,57 pcs.

Cold Chisel, Chisel Type Cold Chisel, Material Applications For Metal, Blade Tip Shape Angled, Blade Width 1/4 in, Includes Striking Cap No, Includes Handle No, Material Steel, Overall Length 5 in, Handle Material Steel, Non-Sparking No, Tether Ready No, Blade Length 0 in, Blade Tip Hardness 55 to 57 HRC, Corrosion-Resistant Yes, Features Cold Chisels Act to Shape and Cut Cold Metal Only, Specially Angled for Strength, Finish Black Oxide

Pilot Punch, Punch Type Roll Pin Punch, Tip Size 5/16 in, Tip Type Point, Shank Shape Round, Shank Width 7/16 in, Hole Diameter 5/16 in, Overall Length 6 in, Container Type Bulk, Includes Handguard No, Tether Ready No, Includes Handle No, Features Variable Point Sizes Available for Variable Radius Sizes for All Pin Configurations, Finish Black Oxide, Insulated No, Material Steel

Screwdriver Handle Pry Bar, Type Screwdriver Style, Bar Width 3/8 in, Overall Length 17 in, Bar Shape Square, End Width 8 in, Tether Ready No, Bar Color Black, Bar Material Steel, Features Black Oxide Finish is Applied for Rust Protection, Handle Provides Comfort and Strength, Screwdriver Style Pry Bars, Finish Black Oxide, Handle Color Red, Includes Handle Yes, Weight 0.53 lb

Nail Puller, Type Nail Pullers, End Style Claw, Bar Width 5/8 in, Overall Length 15 in, Number of Nail Slots 2, Bar Shape Hexagon, End Angle Style L-Shape, End Width 5 1/4 in, Tether Ready No, Bar Color Gray, Bar Material Steel, Features 90 Degrees F Head, Available in Single, Double and Combination Ends, Finish Powder-Coated, Handle Color Gray, Includes Handle No, Standards ANSI, Weight 1.4 lb

Line Up Punch;5/16 In.x12 In.

Pneumatic Separating Forks Set,5Pc

Pilot Punch, Automatic No, Punch Type Roll Pin Punch, Tip Size 3 mm, Tip Type Ball, Shank Shape Round, Shank Diameter 1/4 in, Grip Style Knurled, Hole Diameter 3 mm, Overall Length 4 in, Container Type Bulk, Material Applications Metal, Includes Striking Cap No, Measurement Type Metric, Includes Handguard No, Taper Length 2 in, Tether Ready No, Includes Handle No, Features Variable Point Sizes Available for Variable Radius Sizes for All Pin Configurations, Finish Black Oxide, Insulated No

Pin Punch, Automatic No, Punch Type Pin Punch, Tip Size 1/8 in, Tip Type Flat, Shank Shape Hexagon, Shank Width 5/16 in, Grip Style Plain, Hole Diameter 1/8 in, Overall Length 8 in, Container Type Bulk, Material Applications Metal, Includes Striking Cap No, Measurement Type SAE, Includes Handguard No, Taper Length 3 in, Tether Ready No, Includes Handle No, Corrosion-Resistant Yes, Features Pin Punches are Used to Drive Out and Remove Loosened Pins and Key, Finish Black Oxide, Insulated No

Cold Chisel; Chisel Type Cold Chisel; Material Applications For Metal; Blade Tip Shape Angled; Blade Width 3/4 in; Includes Striking Cap No; Includes Handle Yes; Material Steel; Overall Length 7 in; Handle Material Steel; Non-Sparking No; Tether Ready No; Includes Handguard Yes; Blade Length 0 in; Blade Tip Hardness 53 to 57 HRC; Features Greater Strength; Finish Shot Blasted

Pilot Punch; Automatic No; Punch Type Roll Pin Punch; Tip Size 2 mm; Tip Type Ball; Shank Shape Round; Shank Diameter 1/4 in; Grip Style Knurled; Hole Diameter 2 mm; Overall Length 3 1/4 in; Container Type Bulk; Material Applications Metal; Includes Striking Cap No; Measurement Type Metric; Includes Handguard No; Taper Length 1 1/2 in; Tether Ready No; Includes Handle No; Features Variable Point Sizes Available for Variable Radius Sizes for All Pin Configurations; Finish Black Oxide

Twisted Hex Key Set SAE

Brass Pilot Punch Set; 9Pc

Roll Pin Punch Set; Set Type Punch Set; Types Included Pin Punch; Number of Pieces 12; Includes Handle No; Includes Handguard No; Material Applications Metal; Stainless Steel; Overall Length 2 3/4 in; 3 1/4 in; 3 1/2 in; 4 in; 4 1/2 in; 5 in; 5 1/2 in; 6 in; Includes 1/2 in x 6 in; 1/4 in x 5 1/2 in; 1/8 in x 4 in; 3/16 in x 4 1/2 in; 3/32 in x 3 1/2 in; 3/8 in x 6 in; 5/16 in x 6 in; 5/32 in x 4 1/2 in; 5/64 in x 3 1/4 in; 7/16 in x 6 in; 7/32 in x 5 in; Pilot Punch: 1/16 in x 2 3/4 in

Medium SAE Hex Insert Socket Set;7 pcs

Cape Chisel; Chisel Type Cape Chisel; Material Applications For Metal; Blade Tip Shape Half Round; Blade Width 3/16 in; Includes Striking Cap No; Includes Handle No; Material Steel; Overall Length 5 1/2 in; Handle Material Steel; Non-Sparking No; Tether Ready No; Blade Length 0 in; Blade Tip Hardness 55 to 57 HRC; Corrosion-Resistant Yes; Features Cutting Semi-Circular Grooves for Oil Ways in Bearings; Finish Black Oxide

Pilot Punch;1/4 No.8

Inspection Mirror; Compressed Length 22 in; Extended Length - Maximum Not Applicable; Handle Material PVC; Mirror Adjustment - Maximum 180 Degrees ; Mirror Diameter Not Applicable; Mirror Length 2 1/2 in; Mirror Width 1 3/4 in; Mirror Material Acrylic; Mirror Shape Rectangular; Shaft Type Fixed; Features -; Flexibility Flexible; Includes -; Shaft Material Copper; Swivel Type Swivel

Pin Punch Set;SAE;12 pcs.

Metric Hex Insert Socket Bit Set;7 pcs

Pin Punch; Automatic No; Punch Type Pin Punch; Tip Size 1/4 in; Tip Type Flat; Shank Shape Round; Shank Diameter 3/8 in; Grip Style Knurled; Hole Diameter 1/4 in; Overall Length 4 in; Container Type Bulk; Material Applications Metal; Includes Striking Cap No; Measurement Type SAE; Includes Handguard No; Taper Length 1 1/4 in; Tether Ready No; Includes Handle No; Corrosion-Resistant Yes; Features Pin Punches are Used to Drive Out and Remove Loosened Pins and Key; Finish Black Oxide; Insulated No

Pilot Punch; Automatic No; Punch Type Roll Pin Punch; Tip Size 3/8 in; Tip Type Ball; Shank Shape Round; Shank Width 1/2 in; Grip Style Knurled; Hole Diameter 3/8 in; Overall Length 6 in; Container Type Bulk; Material Applications Metal; Includes Striking Cap No; Measurement Type SAE; Includes Handguard No; Taper Length 4 in; Tether Ready No; Includes Handle No; Features Variable Point Sizes Available for Variable Radius Sizes for All Pin Configurations; Finish Black Oxide; Insulated No

Cold Chisel; Chisel Type Cold Chisel; Material Applications For Metal; Blade Tip Shape Angled; Blade Width 3/4 in; Includes Striking Cap No; Includes Handle No; Material Steel; Overall Length 12 in; Handle Material Steel; Non-Sparking No; Tether Ready No; Blade Length 0 in; Blade Tip Hardness 55 to 57 HRC; Corrosion-Resistant Yes; End Style Oversized; Features Cold Chisels Act to Shape and Cut Cold Metal Only; Specially Angled for Strength; Finish Black Oxide