Filters
Double Face Sledge Hammer,6lb,30 In. Handle
Torsion Bar Unloader, Tool Type GM Torsion Bar Unloader, Application Unloads Torsion Bar, Vehicle Make/Model/Year C/K Truck 2011, For Use With 2011 and 2016 HD C/K Trucks, Material Steel, Overall Length 9 1/2 in, Overall Width 6 5/16 in, Size 9 1/2 in 6 1/4 in 2 in, Number of Pieces 1, Vehicle Make GM, Vehicle Model C/K Truck, Vehicle Model Year 2011
Swivel Filter Wrench,3-1/2 In. To 3-7/8 In.
Crankshaft and Harmonic Balancer Holder, Tool Type Crankshaft and Harmonic Balancer Holder, Length 27 in, Width 6 7/8 in, Height 3 in, Capacity -, Material Steel, For Vehicle Tool Category Engine, Color Black, Includes 50 mm Offset Hex Head and Pin Holder, Crankshaft Pulley Holders, Padded Handle, Number of Pieces 4, Application Replacing Timing Belts On Many Honda and Acura Vehicles, For Use With Honda and Acura Vehicles 1980 to Current When Rr of Crankbolt, -, Size -
Jaw Puller, Jaw Reach 18-3/4 In., Jaw Spread 16 In., Capacity 17-1/2 tons, Number of Jaws 2, Jaw Style Nonreversible, Screw Size 1 In.-14 x 13-1/2 In., Screw Length 1 In., Locking No, Features Forged Steel Exceed Rated Capacity
Axle Stud Cone Plier, Overall Length 10 51/64 in
Fuel Line Disconnect Tool, Tool Type Fuel Line Disconnect Tool, Application Disconnect the High Pressure Oil Rail Supply Line from the Fuel Rail When Removing Fuel Injectors, Material Steel, Overall Length 10 29/32 in, Overall Width 4 1/8 in, Vehicle Make/Model/Year F-250 2003-2009; F-350, F-450 and F-550 Trucks, Excursions and Ford vans, Number of Pieces 1, For Use With Works on the 6.0: Diesel Engine Found in 2003 to 2009 F-250, F-350, F-450, F-550 Trucks, Excursions and Vans
Slide Hammer Puller, Hammer Weight 3.66 lb
Inner Tie Rod Wrench, Tool Type Inner Tie Rod Wrench, Application Unscrew the Tie Rod Link for Replacement, For Use With Universal Wrench will Fit on All Styles and Allow the Technician to Un-Screw the Tie Rod Link for Replacement, Overall Length 7 1/4 in, Overall Width 8 1/8 in, Size 7 1/4 in 2 1/8 in 8 1/8 in, Number of Pieces 1
Clutch Alignment Tool Kit,SAE/Metr,17pcs
U Joint Remover Tool, Tool Type U Joint Remover, Application Removes U Joints, Number of Pieces 5, For Use With Spicer and Meritor U Joints, Includes 3/8 In.-24 x 1 1/2 in Bolts, 5/16 In.-24 x 1 1/2 in Bolts, 7/16 In.-20 x 1 1/2 in Bolts, M8 1.25 mm x 35 mm Bolts, U-Joint Tool, Vehicle Make Dana Spicer
Double End Tire Spoon, Product Type Double End Tire Spoon
Puller Set, Jaw Types Included Internal/External Slide Hammer, Reversible, Screw Size Various
Chain Tensioner Hold Down Tool, Tool Type Chain Tensioner Hold Down Tool, Number of Pieces 1, For Use With Ford Camshafts, Vehicle Make Ford
O Ring/Oil Seal Pick Set, Handle Material Plastic, Handle Style Hex, Number of Pieces 2, Overall Length 7 5/8 in, Tip Material Steel, Tip Style 135 Degrees Angle, 45 Degrees Angle, 90 Degrees Angle, Hook, Tip Thickness Not Applicable, Product Type O-Ring/Oil Seal Pick
Crankshaft Sleeve Installer, Tool Type Crankshaft Seal and Wear Sleeve Installer, Application Eliminates Lip Flare on the Wear Sleeve and Installs the Seal Properly, Install the Front and Rear Crankshaft Wear Sleeves and Seals, Overall Length 7 1/4 in, Overall Width 7 1/4 in, Number of Pieces 2, For Use With Detroit Diesel Series 60 and Two Cycle 92 Engines, J-35686-B, Includes Seal, Wear Sleeve Installer, Vehicle Make Detroit
Piston Ring Compressor Set,6 Pcs.