Square End Mill, 3/4 in Milling Dia., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 1 5/8 in, Overall Length 3 3/4 in, Shank Dia. 3/4 in

Point SV820 Hardslick Coated Carbide SV Point, Carbide, PVD, 2, 4.8 mm, Measurement System Fractional Inch, ANSI Code SV820106

Ball End Mill, 1 in Milling Dia., High Speed Steel, TiN, Non-Coolant Through

Square End Mill; 15/32 in Milling Dia.; Cobalt; TiCN; Weldon Flat; Length of Cut 13/16 in; Overall Length 2 1/2 in; Shank Dia. 3/8 in

Square End Mill, 13/32 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 1 in, Overall Length 2 11/16 in, Shank Dia. 3/8 in

Drill

Square End Mill, 3/4 in Milling Dia., Cobalt, TiCN, Weldon Flat, Length of Cut 9/16 in, Overall Length 3 7/8 in, Shank Dia. 3/4 in

Square End Mill, 7/8 in Milling Dia., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 7/8 in, Overall Length 3 1/8 in, Shank Dia. 3/4 in

Square End Mill; 1/4 in Milling Dia.; High Speed Steel; TiN; Weldon Flat; Length of Cut 5/8 in; Overall Length 2 7/16 in; Shank Dia. 3/8 in

Drill

Square End Mill, 5/8 in Milling Dia., Cobalt, TiCN, Weldon Flat, Length of Cut 1 5/16 in, Overall Length 3 7/16 in, Shank Dia. 5/8 in

Square End Mill, 11/16 in Milling Dia., High Speed Steel, Bright (Uncoated), Weldon Flat, Length of Cut 1 5/8 in, Overall Length 3 3/4 in, Shank Dia. 5/8 in

Square End Mill; 5/8 in Milling Dia.; High Speed Steel; Bright (Uncoated); Weldon Flat; Length of Cut 4 in; Overall Length 6 1/8 in; Shank Dia. 5/8 in

Square End Mill, 11/64 in Milling Dia., Cobalt, Bright (Uncoated), Straight, Length of Cut 1/2 in, Overall Length 2 1/4 in, Shank Dia. 3/16 in

LOC .625X1.25 X.06CR 6FL

Square End Mill, 3/4 in Milling Dia., High Speed Steel, TiCN, Weldon Flat, Length of Cut 4 in, Overall Length 6 1/4 in, Shank Dia. 3/4 in

Square End Mill, 1/4 in Milling Dia., Cobalt, Bright (Uncoated), Weldon Flat, Length of Cut 1 3/4 in, Overall Length 3 9/16 in, Shank Dia. 3/8 in

Spade Drill

Corner Radius End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 1/8 in, 1 1/2 in, 4 in

Square End Mill; 1/4 in Milling Dia.; High Speed Steel; TiCN; Weldon Flat; Length of Cut 5/8 in; Overall Length 3 3/8 in; Shank Dia. 3/8 in

Square End Mill, 7/16 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 9/16 in, Overall Length 2 3/4 in, Shank Dia. 7/16 in, Neck Dia. Not Applicable

Square End Mill, 1/8 in Milling Dia., Carbide, TiAlN, Weldon Flat, Length of Cut 3/8 in, Overall Length 3 1/16 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable

Drill

Drill

Drill

Point SV575 H-Coated Premium Cobalt SV Point; High Speed Steel; PVD; 1; 4 mm; Measurement System Metric; ANSI Code SV575205

Tap

Square End Mill, 3/8 in Milling Dia., High Speed Steel, TiN, Weldon Flat, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 3/8 in

Ball End Mill, 1/4 in Milling Dia., Cobalt, TiCN, Non-Coolant Through

End Mill;3F;5/8x5/8x2-1/2x5;.120RA