Boring Bar, Reverse Boring, AlTiN, 0.0750 in, Micro-Quik Tool Holder

Square End Mill, 18.000mm Milling Dia., Bright (Uncoated), Length of Cut 75.00mm, Overall Length 150.0mm, Shank Dia. 18.000mm

Engraving Blank; Carbide; Double End; 1/8 in; Bright (Uncoated); Fractional Inch; 0.1250

Corner Radius End Mill, 3/64 in Milling Dia., Carbide, nACRo, Straight, Fractional Inch, 0.005 in, 1/16 in, 1 1/2 in

Corner Radius End Mill, 3/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.005 in, 1/16 in, 1 1/2 in

Ball End Mill, 2.000mm Milling Dia., AlTiN

Square End Mill; 3/64 in Milling Dia.; Carbide; AlTiN; Straight; Length of Cut 3/32 in; Overall Length 1 1/2 in; Shank Dia. 1/8 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.02 in, 1/2 in, 1 1/2 in

Square End Mill; 5.00 mm Milling Dia.; Carbide; Bright (Uncoated); Straight; Length of Cut 10.00 mm; Overall Length 57.00 mm; Shank Dia. 6.00 mm

Square End Mill; 3/8 in Milling Dia.; Carbide; AlTiN; Straight; Length of Cut 7/8 in; Overall Length 2 1/2 in; Shank Dia. 3/8 in

Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/4 in

Ball End Mill, 1.1 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Indexable Boring Bar, A-SCLC, Insert Shape 80 Degrees Diamond, Overall Length 5 in, A08K SCLCR 2, 0.3540 in, Insert 50-1100, Coolant Through, Boring, Facing, Right Hand

Ball End Mill, 1 in Milling Dia., Bright (Uncoated)

Corner Radius End Mill, 3/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.01 in, 1/8 in, 2 in

Square End Mill, 0.20 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 0.40 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm

Corner Radius End Mill, 5/64 in Milling Dia., Carbide, nACRo, Straight, Fractional Inch, 0.005 in, 1/8 in, 1 1/2 in

Ball End Mill, 1/32 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Square End Mill, 4.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 15.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Solid Router Bit; Primary Material Application Aluminum; Spiral Upcut; Metric; 3.00 mm Cutter Dia.

Square End Mill, 5/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 5/16 in, Overall Length 1 1/2 in, Shank Dia. 3/16 in

Solid Router Bit, Primary Material Application Composite, Spiral Downcut, Metric, 4.00 mm Cutter Dia.

Ball End Mill, 1.5 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through

Corner Radius End Mill, 6.00 mm Milling Dia., Carbide, AlTiN, Straight, Metric, 0.50mm, 16.00 mm, 57.00 mm

Wrench for Indexable Cutting Tools, Fits Locking Screws QC-3, -4, Wrench Size 1/8 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Weldon Flat, Fractional Inch, 0.03 in, 1 in, 6 in

Corner Radius End Mill, 1/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.005 in, 1/16 in, 1 1/2 in

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Ball End Mill, 1 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through

Square End Mill, 1.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm