Filters
Leather Gloves; ANSI/ISEA Cut Level A4; Standards ASTM D-6413 & ASTM F2302; Thumb Style Wing; Minimum Temperature Not Rated; 1 Pair
Flame and Heat Resistant Gloves, ANSI/ISEA Cut Level 2, ANSI/ISEA Abrasion Level Not Rated, Standards EN 407, EN 1149, ASTM D6413, ASTM F 2675/2675M-13, ANSI 105, 1 Pair
Goat Grain Leather, Minimum Temperature Not Rated, 1 Pair
Palm Dip, ANSI/ISEA Abrasion Level Not Rated, 1 Pair
Mechanics Gloves, Cut-Resistance Coverage Palm Side, Palm Material Aramid, Standards Arc Rated to 12 cal/cm2, ASTM F2675/F2675M-13, ASTM D6413, EN 407, Compliant to NFPA 70e-2015, Complaint to OSHA 29 CFR Part 1926, ANSI, ANSI/ISEA Cut Level A2, 1 Pair
Goat Grain Leather; Minimum Temperature Not Rated; 1 Pair
Mechanics Gloves; Hand Protection Style Glove; Cuff Style Hook-and-Loop; Glove Insulation Material Thinsulate(TM); Insulated Yes; Maximum Temperature 50 Degrees F; Palm Material Synthetic Leather; Glove Back Material Nylon; Knuckle Protection Material Foam; Standards ANSI/ISEA 105; ANSI/ISEA Cut Level A2; Glove Insulation Weight 60 g; 1 Pair
Cut Resistant Glove; 1 Pair
Arc Flash Gloves; ANSI/ISEA Abrasion Level Not Rated; Standards OSHA CFR 29 Part 1926 and NFPA 70e; 1 Pair
Mechanics Gloves; Cut-Resistance Coverage Palm Side; Palm Material Aramid; Standards Arc Rated to 12 cal/cm2; ASTM F2675/F2675M-13; ASTM D6413; EN 407; Compliant to NFPA 70e-2015; Complaint to OSHA 29 CFR Part 1926; ANSI; ANSI/ISEA Cut Level A2; 1 Pair
FR Ultimate WP Utility Glove; ANSI/ISEA Cut Level A4; Stitching Material Kevlar(R); Sold As Pair; Standards Arc Rated to 55 cal/cm²; ASTM F2675/F2675M-13; ASTM D6413; EN 407; Compliant to NFPA 70e-2015; Complaint to OSHA 29 CFR Part 1926; Thumb Style Wing; Minimum Temperature Not Rated; 1 Pair
Palm Dip; ANSI/ISEA Abrasion Level Not Rated; 1 Pair
Leather Gloves; Stitching Material 3 Ply 100D Bonded Nylon; Insulated No; Sold As Pair; Standards Arc Rated to 20.8 cal/cm²; ASTM F2675/F2675M-13; Compliant to NFPA 70e-2015; Complaint to OSHA 29 CFR Part 1926; Thumb Style Wing; Minimum Temperature Not Rated; 1 Pair
Palm Dip; ANSI/ISEA Abrasion Level Not Rated; 1 Pair
Leather Gloves; Insulated No; Thumb Style Terry Cloth; Minimum Temperature Not Rated; 1 Pair
Arc Flash Gloves; ANSI/ISEA Abrasion Level Not Rated; Standards OSHA CFR 29 Part 1926 and NFPA 70e; 1 Pair
Primary Protector; 1 Pair
Mechanics Gloves; Palm Material Leather; 1 Pair
Leather Gloves; Stitching Material 3 Ply 100D Bonded Nylon; Insulated No; Sold As Pair; Standards Arc Rated to 20.8 cal/cm²; ASTM F2675/F2675M-13; Compliant to NFPA 70e-2015; Complaint to OSHA 29 CFR Part 1926; Thumb Style Wing; Minimum Temperature Not Rated; 1 Pair
Leather Gloves; Insulated No; Thumb Style Terry Cloth; Minimum Temperature Not Rated; 1 Pair
FR Ultimate WP Utility Gloves; ANSI/ISEA Cut Level A4; Stitching Material Kevlar(R); Sold As Pair; Standards Arc Rated to 55 cal/cm²; ASTM F2675/F2675M-13; ASTM D6413; EN 407; Compliant to NFPA 70e-2015; Complaint to OSHA 29 CFR Part 1926; Thumb Style Wing; Minimum Temperature Not Rated; 1 Pair
Primary Protector; 1 Pair
Flame and Heat Resistant Gloves; ANSI/ISEA Cut Level 2; ANSI/ISEA Abrasion Level Not Rated; Standards EN 407; EN 1149; ASTM D6413; ASTM F 2675/2675M-13; ANSI 105; 1 Pair
Leather Gloves; Stitching Material 3 Ply 100D Bonded Nylon; Insulated No; Sold As Pair; Standards Arc Rated to 20.8 cal/cm²; ASTM F2675/F2675M-13; Compliant to NFPA 70e-2015; Complaint to OSHA 29 CFR Part 1926; Thumb Style Wing; Minimum Temperature Not Rated; 1 Pair
Mechanics Gloves; Palm Material Synthetic Leather Base Layer with Non-Slip Reinforceent; 1 Pair
Mechanics Gloves; Cut-Resistance Coverage Palm Side; Palm Material Goatskin; Glove Back Material Aramid; Nomex; Standards Arc Rated to 15 cal/cm2; ASTM F2675/F2675M-13; ASTM D6413; EN 407; Compliant to NFPA 70e-2015; Complaint to OSHA 29 CFR Part 1926; ANSI; ANSI/ISEA Cut Level A2; 1 Pair
Palm Dip; ANSI/ISEA Abrasion Level Not Rated; 1 Pair
Flame and Heat Resistant Gloves; ANSI/ISEA Cut Level 2; ANSI/ISEA Abrasion Level Not Rated; Standards EN 407; EN 1149; ASTM D6413; ASTM F 2675/2675M-13; ANSI 105; 1 Pair