Dial 3D Edge Finder, Resolution 0.01 mm, Accuracy 0.01 mm/0.0004 in, IP Rating IP67, SPC Output No, Dial Reading 0-100, Dimension Type Metric, Minimum Measurement - Inch 0 in, Minimum Measurement - mm 0 mm, Number of Probes 2, Operation Type Dial, Shank Type HSK-A40, Construction Aluminum, Data Output Type Wireless, Disc Diameter 4 mm, Display Type Analog Dial, Features Analog, Waterproof, A40 Zero Master Analog Sensor Integrated Taper, Includes Short Probe Tip, Overall Length 131.6 mm

Collet Wrench, For Use With OZ 2-16, Series OZ, Compatible with Product Type OZ Collet Chuck Locknuts

Collet Balance Screw, For Use With All Tool Holders with M6 Balancing Threads, Haimer Shrink Fit Chucks

Collet, ER40, Round, Overall Length 30 mm, DIN 6499, ISO 15488

Shrink Fit Tool Holder, Hole Dia. 7/8 in, Taper Size BT40, Projection 5.1200 in, Nose Dia. 1.3000 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Collet Chuck, Taper Size HSK40E, Min. Collet Capacity 0.1180 in, Max. Collet Capacity 0.375 in, Projection 1.969 in, ER16

Shrink Fit Tool Holder, Hole Dia. 1/8 in, Taper Size BT30, Projection 3.1500 in, Nose Dia. 0.3900 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Tool Holder Tightening Fixture

Shrink Fit Tool Holder, Hole Dia. 3/4 in, Taper Size CV40, Projection 3.1500 in, Nose Dia. 1.3000 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size BT50, Projection 100.00 mm, Nose Dia. 51.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 6.00mm, Taper Size BT40, Projection 130.00 mm, Nose Dia. 21.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 40.00mm, Taper Size HSK100A, Projection 160.00 mm, Nose Dia. 82.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 25.00mm, Taper Size HSK63A, Projection 130.00 mm, Nose Dia. 44.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size HSK63A, Projection 95.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1-1/4 in, Taper Size HSK125A, Projection 9 in, Nose Dia. 2.7600 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Collet Chuck, Taper Size CAT40, Min. Collet Capacity 0.0390 in, Max. Collet Capacity 0.787 in, Projection 6.299 in, ER32

Item Shrink Extension, Compatible Taper Any, Overall Length 160mm, For Use With Shrink Fit Holders

Collet Wrench, For Use With ER Series, Series ER25, Compatible with Product Type Haimer Power Collet Chucks

Collet, ER25, Round, Overall Length 37 mm, DIN 6499, ISO 15488

Collet, ER32, Round, Overall Length 40 mm, DIN 6499, ISO 15488

Shrink Fit Tool Holder, Hole Dia. 6.00mm, Taper Size HSK-E25, Projection 45.00 mm, Nose Dia. 12.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Series HSK-E25

Shrink Fit Tool Holder, Hole Dia. 1-1/4 in, Taper Size HSK63A, Projection 3.3500 in, Nose Dia. 1.7700 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Collet Chuck, Taper Size BT30, Min. Collet Capacity 0.1180 in, Max. Collet Capacity 0.750 in, Projection 3.15 in, ER32

Collet Chuck, Taper Size BT50, Min. Collet Capacity 0.1180 in, Max. Collet Capacity 0.375 in, Projection 5.118 in, ER16

Feather Key; Collet Series NONONONONO; Tool Holder; For Use With Combination Shell End Mill Adapters; Includes Extended Pivot; Size 22mm

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size HSK125A, Projection 200.00 mm, Nose Dia. 51.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder; Hole Dia. 3.00mm; Taper Size HSK63A; Projection 160.00 mm; Nose Dia. 6.00mm; Coolant Fed Coolant Through; Balanced to RPM 25;000; For Use With Carbide and HSS Tools

Collet Chuck, Taper Size HSK50A, Min. Collet Capacity 0.0790 in, Max. Collet Capacity 1.024 in, Projection 3.15 in, ER40

Shrink Fit Tool Holder; Hole Dia. 1/2 in; Taper Size CV50; Projection 5.1200 in; Nose Dia. 0.9400 in; Coolant Fed Coolant Through; Balanced to RPM 25;000; For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 5/8 in, Taper Size KM4X, Projection 7.8700 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools