Intermediate Sleeve, Coolant Through, 15/16 In., Length 23.82 In., Outside Dia. 1.25 In., For Use With Hydraulic Holders

Intermediate Sleeve, Coolant Through, 13mm, Length 19.88 In., Outside Dia. 0.79 In., For Use With Hydraulic Holders

Intermediate Sleeve, Coolant Through, 3/8 In., Length 1.77 In., Outside Dia. 0.47 In., For Use With Hydraulic Holders

Intermediate Sleeve, Coolant Through, 9/16 In., Length 19.88 In., Outside Dia. 0.79 In., For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 6mm; Length 19.88 In.; Outside Dia. 0.79 In.; For Use With Hydraulic Holders

Intermediate Sleeve, Coolant Through, 9/16 In., Length 23.82 In., Outside Dia. 1.26 In., For Use With Hydraulic Holders

Hydraulic Chuck, Shank Type - Machining Taper, Hole Dia. 32.00mm, CV50

Intermediate Sleeve; Coolant Through; 15/16 In.; Length 23.82 In.; Outside Dia. 1.26 In.; For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 10mm; Length 19.88 In.; Outside Dia. 0.75 In.; For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 4mm; Length 1.77 In.; Outside Dia. 0.47 In.; For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 9/16 In.; Length 23.82 In.; Outside Dia. 1.25 In.; For Use With Hydraulic Holders

Hydraulic Chuck; Shank Type - Machining Taper; Hole Dia. 1-1/4 in; CV50

Intermediate Sleeve; Coolant Through; 6mm; Length 1.77 In.; Outside Dia. 0.47 In.; For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 1/4 In.; Length 23.82 In.; Outside Dia. 1.25 In.; For Use With Hydraulic Holders

Lathe Jaw; Hard; For Use With 10 in Chucks; Overall Height 58 mm; Overall Width 40 mm; 30 mm; Package Quantity 3

Intermediate Sleeve; Sealed; GZB-S; 6mm; TENDO; Length 1.77 In.; Outside Dia. 0.50 In.; For Use With Coolant Through Cutting Tools

Intermediate Sleeve; Coolant Through; 7/8 In.; Length 23.82 In.; Outside Dia. 1.25 In.; For Use With Hydraulic Holders

Lathe Jaw; Soft; For Use With 10 in Quick Change Chucks; Overall Length 99 mm; Overall Height 84 mm; Overall Width 26 mm; Package Quantity 3

Intermediate Sleeve; Coolant Through; 7/8 In.; Length 23.82 In.; Outside Dia. 1.26 In.; For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 8mm; Length 1.77 In.; Outside Dia. 0.47 In.; For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 1/4 In.; Length 19.88 In.; Outside Dia. 0.79 In.; For Use With Hydraulic Holders

Intermediate Sleeve; Coolant Through; 5/16 In.; Length 19.88 In.; Outside Dia. 0.79 In.; For Use With Hydraulic Holders

Hydraulic Tool Holder

Lathe Jaw; Hard; For Use With 10 in Chucks; Overall Height 58 mm; Overall Width 40 mm; 30 mm; Package Quantity 3

Intermediate Sleeve; Coolant Through; 13/16 In.; Length 23.82 In.; Outside Dia. 1.25 In.; For Use With Hydraulic Holders

Hydraulic Chuck; Shank Type - Machining Taper; Hole Dia. 12.00mm; BT 40

Intermediate Sleeve; Coolant Through; 18mm; Length 23.82 In.; Outside Dia. 1.26 In.; For Use With Hydraulic Holders

Lathe Jaw; Hard; For Use With 8 in Chucks; Overall Height 53 mm; Overall Width 35 mm; 25 mm; Package Quantity 3

Intermediate Sleeve; Coolant Through; 10mm; Length 23.82 In.; Outside Dia. 1.26 In.; For Use With Hydraulic Holders

Lathe Jaw; Hard; For Use With 10 in Chucks; Overall Height 58 mm; Overall Width 40 mm; 30 mm; Package Quantity 3